AD8627ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8627 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 24V |
| Number of Channels | 1 |
| Operating Supply Current | 850μA |
| Max Supply Current | 785μA |
| Quiescent Current | 850μA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 87 dB |
| Current - Input Bias | 0.25pA |
| Voltage - Supply, Single/Dual (±) | 5V~26V ±2.5V~13V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -13V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 107.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 104dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 350μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Input Voltage Noise Density | 17.5nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8627ARZ Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the J-FET type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 13V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 750μV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 850μA . 107.23dB should remain the voltage gain. The op amp ic has 1 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 24V voltage. The current is quiescent at 850μA.
AD8627ARZ Features
8 Pins
supply voltage of 13V
107.23dB voltage gain
Output Type: Rail-to-Rail
AD8627ARZ Applications
There are a lot of Analog Devices Inc. AD8627ARZ Instrumentational OP Amps applications.
- Commercial audio systems
- Radar
- Video amplifiers
- PDA
- ECG equipment
- Proportional operation circuits
- Displayers for aircraft and air transportation control systems
- Comparator
- Professional videography
- Oscilloscopes
