AD8627ARZ-REEL7
| Parameters | |
|---|---|
| Current - Input Bias | 0.25pA |
| Voltage - Supply, Single/Dual (±) | 5V~26V ±2.5V~13V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 750μV |
| Gain Bandwidth Product | 5MHz |
| Neg Supply Voltage-Nom (Vsup) | -13V |
| Unity Gain BW-Nom | 5000 kHz |
| Voltage Gain | 107.23dB |
| Average Bias Current-Max (IIB) | 0.00006μA |
| Power Supply Rejection Ratio (PSRR) | 104dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 350μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 17.5nV/sqrt Hz |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8627 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 850μA |
| Quiescent Current | 850μA |
| Supply Current-Max | 0.9mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 87 dB |
AD8627ARZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 13V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. The op amp ic has an array of 8 pins on it. The input offset voltage is 750μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. You can run this op amp ic on 850μA . You should keep the voltage gain at 107.23dB for the time being. Buffer op amp is equipped with 1 channels on the device. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. This linear amplifier pack is based on the TAPE AND REEL axis. There is an 850μA quiescent current in linear amplifier.
AD8627ARZ-REEL7 Features
8 Pins
supply voltage of 13V
107.23dB voltage gain
Output Type: Rail-to-Rail
AD8627ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8627ARZ-REEL7 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Power transmission
- Signal transformation
- Home audio systems
- Medical instruments
- Voltage regulation circuit
- Radiation thermometry transducers
- Inverse/same-phase proportional circuit
- Radar
- Professional videography
