AD8628AUJZ-R2

1 Channels 30mA per Channel 30pA 140 dB Instrumentational OP Amps 3V 2.7V~5V ±1.35V~2.5V AD8628 5 Pins SOT-23-5 Thin, TSOT-23-5

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8628AUJZ-R2
Package: SOT-23-5 Thin, TSOT-23-5
Datasheet: PDF
Stock: 539
Description: 1 Channels 30mA per Channel 30pA 140 dB Instrumentational OP Amps 3V 2.7V~5V ±1.35V~2.5V AD8628 5 Pins SOT-23-5 Thin, TSOT-23-5(Kg)

Inquiry Now

Details

Tags

Parameters
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Low-Bias	YES
Micropower	NO
Max Frequency	10kHz
Programmable Power	NO
Input Capacitance	10pF
Height	1.3mm
Length	3mm
Width	1.7mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	SOT-23-5 Thin, TSOT-23-5
Surface Mount	YES
Number of Pins	5
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8628
Pin Count	5
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Number of Channels	1
Operating Supply Current	850μA
Quiescent Current	1.1mA
Slew Rate	1V/μs
Architecture	CHOPPER-STAB
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	140 dB
Current - Input Bias	30pA
Voltage - Supply, Single/Dual (±)	2.7V~5V ±1.35V~2.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	1μV
Bandwidth	2.5MHz
Unity Gain BW-Nom	2500 kHz
Voltage Gain	145dB
Power Supply Rejection Ratio (PSRR)	115dB
Low-Offset	YES

AD8628AUJZ-R2 Overview

There is a SOT-23-5 Thin, TSOT-23-5 case package that contains the instrumentation amplifiers. A Zero-Drift-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. In this case, there are 5 pins on the board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. There are 5 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 1μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 850μA, this op amp ic can operate. Keeping the voltage gain at 145dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 3V voltage. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Linear amplifier has a quiescent current of 1.1mA.