AD8628AUJZ-REEL
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Operating Supply Current | 1.1mA |
| Quiescent Current | 1.1mA |
| Slew Rate | 1V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 30pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V ±1.35V~2.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 5μV |
| Gain Bandwidth Product | 2.5MHz |
| Unity Gain BW-Nom | 2500 kHz |
| Voltage Gain | 145dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 10pF |
| Wideband | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8628 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
AD8628AUJZ-REEL Overview
There is a SOT-23-5 Thin, TSOT-23-5 case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Zero-Drift-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. There are 5 pins on this chip. There is an input offset voltage of 5μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. As long as the supply current of the chip does not exceed 1.1mA, this op amp ic can operate. There should be no change in the voltage gain. Op amp ic has 1 channels. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of instrumentation amplifier is rated 3V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. As a result, linear amplifier's quiescent current is 1.1mA.
AD8628AUJZ-REEL Features
5 Pins
supply voltage of 5V
145dB voltage gain
Output Type: Rail-to-Rail
AD8628AUJZ-REEL Applications
There are a lot of Analog Devices Inc. AD8628AUJZ-REEL Instrumentational OP Amps applications.
- Ultrasound transducers
- Instrumentation
- Television
- Logarithmic operation circuits
- Scintillation detectors
- Non-polarized electrodes
- Displayers for aircraft and air transportation control systems
- Division circuits
- High/low-pass filter circuit
- Band-stop filter
