AD8630ARUZ

4 Channels 30mA per Channel 100pA 140 dB Instrumentational OP Amps 0.0015μA 3V 2.7V~5V ±1.35V~2.5V AD8630 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8630ARUZ
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 281
Description: 4 Channels 30mA per Channel 100pA 140 dB Instrumentational OP Amps 0.0015μA 3V 2.7V~5V ±1.35V~2.5V AD8630 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	14
Operating Temperature	-40°C~125°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AD8630
Pin Count	14
Output Type	Rail-to-Rail
Operating Supply Voltage	3V
Power Supplies	+-1.35/+-2.5/2.7/5V
Number of Channels	4
Operating Supply Current	4.4mA
Max Supply Current	4.4mA
Quiescent Current	1.1mA
Slew Rate	1V/μs
Architecture	CHOPPER-STAB
Amplifier Type	Zero-Drift
Common Mode Rejection Ratio	140 dB
Current - Input Bias	100pA
Voltage - Supply, Single/Dual (±)	2.7V~5V ±1.35V~2.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	2.5μV
Bandwidth	2.5MHz
Unity Gain BW-Nom	2500 kHz
Voltage Gain	145dB
Average Bias Current-Max (IIB)	0.0015μA
Power Supply Rejection Ratio (PSRR)	130dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	1μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.0003μA
Programmable Power	NO
Input Capacitance	10pF
Height	1mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8630ARUZ Overview

Packaging for the buffer amplifier is in the form of a 14-TSSOP (0.173, 4.40mm Width) case. Buffer amps of this type are called Zero-Drift-types. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 14. Buffer amplifier has a total of 14 pins. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 14 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 2.5μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, op amp ranges -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 4.4mA . Voltage gain should remain at 145dB. 4 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 3V. Linear amplifier has a quiescent current of 1.1mA.