AD8630ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8630 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Power Supplies | +-1.35/+-2.5/2.7/5V |
| Number of Channels | 4 |
| Operating Supply Current | 4.4mA |
| Quiescent Current | 1.1mA |
| Slew Rate | 1V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V ±1.35V~2.5V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 2.5μV |
| Gain Bandwidth Product | 2.5MHz |
| Unity Gain BW-Nom | 2500 kHz |
| Voltage Gain | 145dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0003μA |
| Programmable Power | NO |
| Input Capacitance | 10pF |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8630ARZ-REEL Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A Zero-Drift-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 14 terminations. The total number of pins on linear amplifier is 14. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 14-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 2.5μV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 4.4mA . There should be no change in the voltage gain. Instrumentation amplifier has 4 channels on it. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 3V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. 1.1mA quiescent currents are flowing through buffer op amp.
AD8630ARZ-REEL Features
14 Pins
supply voltage of 5V
145dB voltage gain
Output Type: Rail-to-Rail
AD8630ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8630ARZ-REEL Instrumentational OP Amps applications.
- Band-pass filter
- PDA
- Communication device
- E-book readers
- Automotive sensors
- Vehicle electronics
- Commercial audio systems
- Information processing
- Polarized electrodes
- Weak signal detection
