AD8638ARJZ-R2
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8638 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.25mA |
| Quiescent Current | 1.5mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 118 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 3μV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1350 kHz |
| Voltage Gain | 136dB |
| Power Supply Rejection Ratio (PSRR) | 127dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Voltage Noise Density | 60nV/sqrt Hz |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8638ARJZ-R2 Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. An op amp ic of the Zero-Drift type. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. Buffer amplifier has a total of 5 pins on it. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 3μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. An 1.25mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 136dB at all times. 1 channels are available on the instrumentation amplifier. On the output type, there are Rail-to-Rail different types of op amps. To pack the operational amplifier ics, TR is adopted as the packing method. There is a quiescent current of 1.5mA in this operational amplifier circuit.
AD8638ARJZ-R2 Features
5 Pins
supply voltage of 5V
136dB voltage gain
Output Type: Rail-to-Rail
AD8638ARJZ-R2 Applications
There are a lot of Analog Devices Inc. AD8638ARJZ-R2 Instrumentational OP Amps applications.
- Automatic control
- Medical instruments
- Proportional counter tubes
- Displayers for aircraft and air transportation control systems
- Measurements of Wheatstone bridge
- E-book readers
- earphone
- Thermocouples
- Semiconductor detectors
- Video data acquisition
