AD8639ACPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8639 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.5mA |
| Supply Current-Max | 3.4mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 142 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 9μV |
| Bandwidth | 1.5MHz |
| Unity Gain BW-Nom | 1350 kHz |
| Voltage Gain | 136dB |
| Average Bias Current-Max (IIB) | 0.000105μA |
| Power Supply Rejection Ratio (PSRR) | 143dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 3μV |
| Settling Time | 4 μs |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000075μA |
| Programmable Power | NO |
| Input Capacitance | 1.7pF |
| Input Voltage Noise Density | 60nV/sqrt Hz |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8639ACPZ-REEL7 Overview
There is a 8-WFDFN Exposed Pad, CSP case package that contains the instrumentation amplifiers. Buffer amps of this type are called Zero-Drift-types. Linear amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. Op amp ic rates 9μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Operational amplifier can operate supply current at 3mA. There should be no change in the voltage gain at 136dB. There are 2 channels on the operational amplifiers. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. This linear amplifier pack is based on the TAPE AND REEL axis. As a result, linear amplifier's quiescent current is 1.5mA.
AD8639ACPZ-REEL7 Features
8 Pins
supply voltage of 5V
136dB voltage gain
Output Type: Rail-to-Rail
AD8639ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8639ACPZ-REEL7 Instrumentational OP Amps applications.
- Video computer boards
- Portable docking station
- Displayers for aircraft and air transportation control systems
- Industrial applications including automation
- Scintillation detectors
- Addition operation circuits
- MP3
- Band-pass filter
- Video amplifiers
- High/low-pass filter circuit
