Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8639 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Channels |
2 |
Operating Supply Current |
3mA |
Quiescent Current |
1.5mA |
Supply Current-Max |
3.4mA |
Slew Rate |
2V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
Zero-Drift |
Common Mode Rejection Ratio |
142 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
5V~16V ±2.5V~8V |
Output Current per Channel |
37mA |
Input Offset Voltage (Vos) |
9μV |
Gain Bandwidth Product |
1.5MHz |
Unity Gain BW-Nom |
1350 kHz |
Voltage Gain |
136dB |
Average Bias Current-Max (IIB) |
0.000105μA |
Power Supply Rejection Ratio (PSRR) |
143dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
16V |
Voltage - Input Offset |
3μV |
Settling Time |
4 μs |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.000075μA |
Programmable Power |
NO |
Input Capacitance |
1.7pF |
Wideband |
NO |
Height Seated (Max) |
1.1mm |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8639ARMZ-R7 Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Zero-Drift-type buffer amplifier is shown here. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 9μV voltage. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . Using an 3mA supply current, this operational amplifier ics can be operated. 136dB should be the voltage gain. Instrumentation amplifier has 2 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Buffer amplifier has a quiescent current of 1.5mA.
AD8639ARMZ-R7 Features
8 Pins
supply voltage of 5V
136dB voltage gain
Output Type: Rail-to-Rail
AD8639ARMZ-R7 Applications
There are a lot of Analog Devices Inc. AD8639ARMZ-R7 Instrumentational OP Amps applications.
- Ultrasound transducers
- Polarized electrodes
- Addition operation circuits
- Industrial applications including automation
- Blood pressure sensors
- Scintillation detectors
- Signal filtering
- Professional videography
- Power generator
- Power control