AD8639WARZ-R7
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8639 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 3mA |
| Quiescent Current | 1.5mA |
| Supply Current-Max | 3.4mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 142 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 9μV |
| Gain Bandwidth Product | 1.5MHz |
| Unity Gain BW-Nom | 1350 kHz |
| Voltage Gain | 136dB |
| Average Bias Current-Max (IIB) | 0.000105μA |
| Power Supply Rejection Ratio (PSRR) | 143dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 16V |
| Voltage - Input Offset | 3μV |
| Settling Time | 4 μs |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000075μA |
| Programmable Power | NO |
| Screening Level | AEC-Q100 |
| Input Capacitance | 1.7pF |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
AD8639WARZ-R7 Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. The instrumentation amplifier in this picture is of the Zero-Drift-type. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. Op amp rates 9μV as input offset voltage. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 3mA. Maintain 136dB as the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. As a result of this, the buffer amplifier is packed in TAPE AND REEL. As the name implies, Automotive refers to the series of the buffer op amp. 1.5mA quiescent currents are flowing through buffer op amp.
AD8639WARZ-R7 Features
8 Pins
supply voltage of 5V
136dB voltage gain
Output Type: Rail-to-Rail
AD8639WARZ-R7 Applications
There are a lot of Analog Devices Inc. AD8639WARZ-R7 Instrumentational OP Amps applications.
- PDA
- Power generator
- Multiplication circuits
- Band-stop filter
- Displayers for aircraft and air transportation control systems
- Communication device
- ECG equipment
- Semiconductor detectors
- Radiation thermometry transducers
- Instrumentation
