Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
13V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8642 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Channels |
2 |
Operating Supply Current |
580μA |
Quiescent Current |
290μA |
Supply Current-Max |
0.66mA |
Slew Rate |
3V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
107 dB |
Current - Input Bias |
0.25pA |
Voltage - Supply, Single/Dual (±) |
5V~26V ±2.5V~13V |
Output Current per Channel |
12mA |
Input Offset Voltage (Vos) |
750μV |
Gain Bandwidth Product |
3.5MHz |
Neg Supply Voltage-Nom (Vsup) |
-13V |
Unity Gain BW-Nom |
3500 kHz |
Voltage Gain |
102.92dB |
Power Supply Rejection Ratio (PSRR) |
107dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
13.65V |
Voltage - Input Offset |
70μV |
Low-Bias |
YES |
Micropower |
YES |
Bias Current-Max (IIB) @25C |
0.000001μA |
Neg Supply Voltage-Max (Vsup) |
-13.65V |
Input Voltage Noise Density |
28.5nV/sqrt Hz |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8642ARZ-REEL7 Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. This is a J-FET type op amp. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 13V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 8 pins on this chip. There is an input offset voltage of 750μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. As long as the supply current of the chip does not exceed 580μA, this op amp ic can operate. There should be no change in the voltage gain. Op amp ic has 2 channels. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Buffer amplifier has a quiescent current of 290μA.
AD8642ARZ-REEL7 Features
8 Pins
supply voltage of 13V
102.92dB voltage gain
Output Type: Rail-to-Rail
AD8642ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8642ARZ-REEL7 Instrumentational OP Amps applications.
- Integrator circuits
- pH (acidity)
- Subtraction operation circuits
- Professional videography
- Radar
- Thermocouples
- Precision measurement
- Automation control systems
- Weighing systems
- Hand-held batteries