AD8643ACPZ-REEL7
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8643 |
| Pin Count | 16 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-2.5/+-13/5/26V |
| Number of Channels | 4 |
| Operating Supply Current | 1.56mA |
| Quiescent Current | 290μA |
| Supply Current-Max | 1.32mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 107 dB |
| Current - Input Bias | 0.25pA |
| Voltage - Supply, Single/Dual (±) | 5V~26V ±2.5V~13V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 750μV |
| Bandwidth | 2.5MHz |
| Gain Bandwidth Product | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -13V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 102.92dB |
| Average Bias Current-Max (IIB) | 0.00026μA |
| Power Supply Rejection Ratio (PSRR) | 107dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 13.65V |
| Voltage - Input Offset | 70μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000001μA |
| Neg Supply Voltage-Max (Vsup) | -13.65V |
| Input Voltage Noise Density | 28.5nV/sqrt Hz |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
AD8643ACPZ-REEL7 Overview
The linear amplifier is packaged in a 16-WFQFN Exposed Pad, CSP case. The instrumentation amplifier in this picture is of the J-FET-type. A Tape & Reel (TR) case is used for delivering the op amp. A total of 16 terminations have been reported in the past few weeks. In total, there are 16 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 13V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. There are 16 pins on this chip. The input offset voltage is 750μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Operational amplifier can operate supply current at 1.56mA. There should be no change in the voltage gain at 102.92dB. 4 channels are available on the instrumentation amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. The quiescent current is 290μA.
AD8643ACPZ-REEL7 Features
16 Pins
supply voltage of 13V
102.92dB voltage gain
Output Type: Rail-to-Rail
AD8643ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8643ACPZ-REEL7 Instrumentational OP Amps applications.
- Multiplication circuits
- Communication device
- Precision measurement
- Signal operation
- Digital cameras
- Gaming industry
- Active probe
- Power transmission
- Integrator circuits
- earphone
