AD8648ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8648 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Channels | 4 |
| Operating Supply Current | 8mA |
| Quiescent Current | 2mA |
| Supply Current-Max | 10mA |
| Slew Rate | 11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 84 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 120mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 24MHz |
| Unity Gain BW-Nom | 24000 kHz |
| Voltage Gain | 116dB |
| Average Bias Current-Max (IIB) | 0.00055μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 600μV |
| Settling Time | 500 ns |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 6.7pF |
| Wideband | NO |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8648ARZ-REEL Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. This is a General Purpose type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. There are a total of 14 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 2.5mV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Operational amplifier can operate supply current at 8mA. 116dB should be the voltage gain. 4 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The linear amplifier is packaged by using a TAPE AND REEL axis. The quiescent current is 2mA.
AD8648ARZ-REEL Features
14 Pins
supply voltage of 5V
116dB voltage gain
Output Type: Rail-to-Rail
AD8648ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8648ARZ-REEL Instrumentational OP Amps applications.
- Radar
- Industrial control system
- Switching amplifier
- PDA
- Hand-held batteries
- single/dual op amp sum and difference circuits
- Scintillation detectors
- Professional videography
- Broadcasting
- Laptop
