AD8651ARZ

1 Channels 40mA per Channel 1pA 95 dB Instrumentational OP Amps 0.0006μA 5V 2.7V~5.5V ±1.35V~2.75V AD8651 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8651ARZ
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 418
Description: 1 Channels 40mA per Channel 1pA 95 dB Instrumentational OP Amps 0.0006μA 5V 2.7V~5.5V ±1.35V~2.75V AD8651 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Series	DigiTrim®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8651
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Channels	1
Operating Supply Current	9mA
Quiescent Current	9mA
Slew Rate	41V/μs
Amplifier Type	Voltage Feedback
Common Mode Rejection Ratio	95 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	350μV
Bandwidth	50MHz
Unity Gain BW-Nom	50000 kHz
Voltage Gain	115dB
Average Bias Current-Max (IIB)	0.0006μA
Power Supply Rejection Ratio (PSRR)	94dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	100μV
Settling Time	200 ns
Low-Bias	YES
Micropower	NO
Programmable Power	NO
Input Capacitance	9pF
Input Voltage Noise Density	5nV/sqrt Hz
Height	1.5mm
Length	5mm
Width	4mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8651ARZ Overview

In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called Voltage Feedback-types. In the case of Tube cases, linear amplifier will be delivered. There is a growing number of terminations approaching the number of 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 350μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. As long as the supply current of the chip does not exceed 9mA, this op amp ic can operate. There should be no change in the voltage gain. Instrumentation amplifier has 1 channels on it. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The DigiTrim? indicates the series number of the op amp. There is an 9mA quiescent current in linear amplifier.