AD8651ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8651 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Channels | 1 |
| Operating Supply Current | 9mA |
| Quiescent Current | 9mA |
| Slew Rate | 41V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Settling Time | 200 ns |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 9pF |
| Wideband | NO |
| Input Voltage Noise Density | 5nV/sqrt Hz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8651ARZ-REEL Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. A Voltage Feedback-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 8-pin op amp ic is included in the package. In terms of input offset voltage, operational amplifier rates 350μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. It is possible to operate this buffer amplifier from a supply current of 9mA . It is recommended to keep the voltage gain at 115dB at all times. On the buffer amps, there are 1 channels that can be used. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. As a result of this, the buffer amplifier is packed in TAPE AND REEL. In this case, DigiTrim? represents the instrumentation amplifiers' series number. There is an 9mA quiescent current running through op amp ic.
AD8651ARZ-REEL Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
AD8651ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8651ARZ-REEL Instrumentational OP Amps applications.
- Portable docking station
- Communication
- Switching amplifier
- Signal operation
- Logarithmic operation circuits
- Video computer boards
- single/dual op amp sum and difference circuits
- Proportional counter tubes
- Blood pressure sensors
- Precision measurement
