AD8651ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8651 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.7/5V |
| Number of Channels | 1 |
| Operating Supply Current | 9mA |
| Quiescent Current | 9mA |
| Slew Rate | 41V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Settling Time | 200 ns |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 9pF |
| Wideband | NO |
| Input Voltage Noise Density | 5nV/sqrt Hz |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8651ARZ-REEL7 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are Voltage Feedback types of amplifier on the chip. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. In total, there are 8 pins on this op amp ic. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. An 8-pin op amp ic is included in the package. There is an input offset voltage of 350μV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 9mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. The op amp ic has 1 channels on it. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. As a result of this, the buffer amplifier is packed in TAPE AND REEL. Buffer op amp series numbers are indicated by the DigiTrim?. Linear amplifier has a quiescent current of 9mA.
AD8651ARZ-REEL7 Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
AD8651ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8651ARZ-REEL7 Instrumentational OP Amps applications.
- Multimedia playback equipment
- Portable electronic products powered by batteries
- Power generator
- Signal amplification
- Exponential operation circuits
- RF cable systems
- Portable media players
- PDA
- Ultrasound transducers
- Professional videography
