AD8652ARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8652 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 18mA |
| Quiescent Current | 9mA |
| Slew Rate | 41V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 115dB |
| Average Bias Current-Max (IIB) | 0.0006μA |
| Power Supply Rejection Ratio (PSRR) | 94dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 90μV |
| Settling Time | 200 ns |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Input Capacitance | 9pF |
| Wideband | NO |
| Input Voltage Noise Density | 5nV/sqrt Hz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8652ARMZ-REEL Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. Buffer amps of this type are called Voltage Feedback-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 350μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureUsing an 18mA supply current, this operational amplifier ics can be operated. There should be no change in the voltage gain at 115dB. As far as the device is concerned, buffer amplifier has 2 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. Buffer op amp series numbers are indicated by the DigiTrim?. 9mA quiescent currents are flowing through buffer op amp.
AD8652ARMZ-REEL Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
AD8652ARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD8652ARMZ-REEL Instrumentational OP Amps applications.
- Portable media players
- PDA
- Exponential operation circuits
- Large motor controllers
- Ultrasound transducers
- Image computer boards
- Division circuits
- Proportional counter tubes
- ECG equipment
- Power control
