AD8656ARMZ-REEL

2 Channels 220mA per Channel 1pA 100 dB Instrumentational OP Amps 0.0005μA 5V 2.7V~5.5V AD8656 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8656ARMZ-REEL
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 742
Description: 2 Channels 220mA per Channel 1pA 100 dB Instrumentational OP Amps 0.0005μA 5V 2.7V~5.5V AD8656 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	DigiTrim®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AD8656
Pin Count	8
Output Type	Rail-to-Rail
Operating Supply Voltage	5V
Number of Channels	2
Operating Supply Current	9mA
Quiescent Current	4.5mA
Supply Current-Max	10.6mA
Slew Rate	11V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	100 dB
Current - Input Bias	1pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V
Output Current per Channel	220mA
Input Offset Voltage (Vos)	250μV
Bandwidth	28MHz
Unity Gain BW-Nom	28000 kHz
Voltage Gain	110dB
Average Bias Current-Max (IIB)	0.0005μA
Power Supply Rejection Ratio (PSRR)	105dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	50μV
Settling Time	370 ns
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.00001μA
Programmable Power	NO
Input Capacitance	16.7pF
Input Voltage Noise Density	4nV/sqrt Hz
Height	950μm
Length	3.2mm
Width	3.2mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8656ARMZ-REEL Overview

Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. It has 8 pins that make up the linear amplifier. Op amp ic rates 250μV for input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 9mA . Keeping the voltage gain at 110dB is the best course of action. There are 2 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The DigiTrim? stands for the buffer op amp's serial number. Buffer amplifier has a quiescent current of 4.5mA.