AD8656ARZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8656 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 9mA |
| Max Supply Current | 9mA |
| Quiescent Current | 4.5mA |
| Slew Rate | 11V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 220mA |
| Input Offset Voltage (Vos) | 250μV |
| Bandwidth | 28MHz |
| Unity Gain BW-Nom | 28000 kHz |
| Voltage Gain | 110dB |
| Average Bias Current-Max (IIB) | 0.0005μA |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 50μV |
| Settling Time | 370 ns |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00001μA |
| Programmable Power | NO |
| Input Capacitance | 16.7pF |
| Input Voltage Noise Density | 4nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8656ARZ Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. There is a growing number of terminations approaching the number of 8. It consists of a total of 8 pins in total. This linear amplifier should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. Op amp rates 250μV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 9mA . There should be no change in the voltage gain. Buffer op amp is equipped with 2 channels on the device. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 5V. DigiTrim? corresponds to the op amp's series. Currently, linear amplifier is operating with a quiescent current of 4.5mA.
AD8656ARZ Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
AD8656ARZ Applications
There are a lot of Analog Devices Inc. AD8656ARZ Instrumentational OP Amps applications.
- Communication
- Wireless base stations
- Hand-held batteries
- Navigation
- Logarithmic operation circuits
- Video amplifiers
- Signal transformation
- Tablets
- Communication device
- Weighing systems
