Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
DigiTrim® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8656 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Channels |
2 |
Operating Supply Current |
9mA |
Quiescent Current |
4.5mA |
Supply Current-Max |
10.6mA |
Slew Rate |
11V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
100 dB |
Current - Input Bias |
1pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V |
Output Current per Channel |
220mA |
Input Offset Voltage (Vos) |
250μV |
Gain Bandwidth Product |
28MHz |
Unity Gain BW-Nom |
28000 kHz |
Voltage Gain |
110dB |
Average Bias Current-Max (IIB) |
0.0005μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
50μV |
Settling Time |
370 ns |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.00001μA |
Programmable Power |
NO |
Input Capacitance |
16.7pF |
Wideband |
NO |
Input Voltage Noise Density |
4nV/sqrt Hz |
Height Seated (Max) |
1.75mm |
Length |
4.9mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8656ARZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are located on the operational amplifiers. In terms of input offset voltage, operational amplifier rates 250μV. Surface Mount is the recommended mounting type for this linear amplifier. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureAs long as the supply current of the chip does not exceed 9mA, this op amp ic can operate. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. DigiTrim? corresponds to linear amplifier's series. The current is quiescent at 4.5mA.
AD8656ARZ-REEL Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
AD8656ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8656ARZ-REEL Instrumentational OP Amps applications.
- Industrial applications including automation
- MP3
- Communication device
- single/dual op amp sum and difference circuits
- Non-polarized electrodes
- RF cable systems
- Tablets
- Industrial control system
- E-book readers
- Power transmission