AD8657ACPZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AD8657 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 36μA |
| Quiescent Current | 18μA |
| Supply Current-Max | 0.066mA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 230 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 12 μs |
| Low-Bias | YES |
| Micropower | YES |
| Input Capacitance | 10.5pF |
| Input Voltage Noise Density | 50nV/sqrt Hz |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8657ACPZ-R7 Overview
A 8-WFDFN Exposed Pad, CSP case is used to package the op amp. An op amp of this type is a General Purpose-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 10V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 8 pins that make up the linear amplifier. The input offset voltage is 350μV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . A supply current of 36μA can be used to operate this linear amplifier. The voltage gain should stay at 120dB. Buffer op amp is equipped with 2 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. Currently, linear amplifier is operating with a quiescent current of 18μA.
AD8657ACPZ-R7 Features
8 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8657ACPZ-R7 Applications
There are a lot of Analog Devices Inc. AD8657ACPZ-R7 Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Addition operation circuits
- Exponential operation circuits
- Information processing
- Band-stop filter
- Radiation thermometry transducers
- Inverse/same-phase proportional circuit
- Proportional operation circuits
- Mobile phone
- Proportional counter tubes
