AD8657ACPZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8657 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 36μA |
| Quiescent Current | 18μA |
| Supply Current-Max | 0.066mA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 12 μs |
| Low-Bias | YES |
| Micropower | YES |
| Input Capacitance | 10.5pF |
| Input Voltage Noise Density | 50nV/sqrt Hz |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8657ACPZ-RL Overview
There is a 8-WFDFN Exposed Pad, CSP case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. As a reminder, this buffer op amp should be powered by 10V battery and that the battery should be inserted in the amplifier. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 350μV. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. An 36μA volt supply current is needed for this linear amplifier to operate. Maintain 120dB as the voltage gain. Op amp ic has 2 channels. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. This linear amplifier pack is based on the TAPE AND REEL axis. The quiescent current is 18μA.
AD8657ACPZ-RL Features
8 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8657ACPZ-RL Applications
There are a lot of Analog Devices Inc. AD8657ACPZ-RL Instrumentational OP Amps applications.
- Ultrasound transducers
- Biopotential
- Portable electronic products powered by batteries
- Measurements of Wheatstone bridge
- Image computer boards
- Radiation thermometry transducers
- Multiplication circuits
- Tablets
- Navigation
- Division circuits
