AD8657ARMZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8657 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 36μA |
| Quiescent Current | 18μA |
| Supply Current-Max | 0.066mA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 125dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 12 μs |
| Low-Bias | YES |
| Micropower | YES |
| Input Capacitance | 10.5pF |
| Input Voltage Noise Density | 50nV/sqrt Hz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8657ARMZ-RL Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called General Purpose-types. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 10V. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. In terms of input offset voltage, operational amplifier rates 350μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 36μA can be used to operate this linear amplifier. Op amp is a member of the 120dB's 120dB family. Buffer op amp is equipped with 2 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. 18μA quiescent currents are flowing through buffer op amp.
AD8657ARMZ-RL Features
8 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8657ARMZ-RL Applications
There are a lot of Analog Devices Inc. AD8657ARMZ-RL Instrumentational OP Amps applications.
- Multimedia playback equipment
- PDA
- Radiation thermometry transducers
- Video data acquisition
- Digital cameras
- High input resistance broadband
- Professional videography
- pH (acidity)
- Proportional operation circuits
- Division circuits
