AD8659ARZ
| Parameters | |
|---|---|
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 15 μs |
| Low-Bias | NO |
| Micropower | YES |
| Max Frequency | 1kHz |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 3.5pF |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8659 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.35/+-9/2.7/18V |
| Number of Channels | 4 |
| Operating Supply Current | 72μA |
| Nominal Supply Current | 72μA |
| Quiescent Current | 18μA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 350μV |
| Bandwidth | 305 kHz |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 230 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0026μA |
| Power Supply Rejection Ratio (PSRR) | 115dB |
AD8659ARZ Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 14. A total of 14 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 10V volts. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 350μV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using an 72μA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 120dB at all times. Buffer op amp is equipped with 4 channels on the device. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Currently, linear amplifier is operating with a quiescent current of 18μA.
AD8659ARZ Features
14 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8659ARZ Applications
There are a lot of Analog Devices Inc. AD8659ARZ Instrumentational OP Amps applications.
- Multimedia playback equipment
- Digital cameras
- Comparator
- Television
- Micro signal measurement
- Communication device
- Oscilloscopes
- earphone
- Commercial audio systems
- Differentiator circuits
