AD8659ARZ-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8659 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.35/+-9/2.7/18V |
| Number of Channels | 4 |
| Operating Supply Current | 72μA |
| Nominal Supply Current | 72μA |
| Quiescent Current | 18μA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 230 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0026μA |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 15 μs |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 3.5pF |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8659ARZ-R7 Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the General Purpose type. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 14 terminations. In this case, there are 14 pins on the board. This linear amplifier should be powered by an 10V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. Linear amplifier includes 14 pins. Op amp rates 350μV as input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 72μA volt supply current is needed for this linear amplifier to operate. It is a member of the 120dB's 120dB family. There are 4 channels on the operational amplifiers. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. There is an 18μA quiescent current running through op amp ic.
AD8659ARZ-R7 Features
14 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8659ARZ-R7 Applications
There are a lot of Analog Devices Inc. AD8659ARZ-R7 Instrumentational OP Amps applications.
- Communication
- Automation control systems
- Laptop
- Polarized electrodes
- Wireless base stations
- Exponential operation circuits
- Video amplifiers
- Portable media players
- Television
- Non-polarized electrodes
