AD8659ARZ-RL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 10V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8659 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.35/+-9/2.7/18V |
| Number of Channels | 4 |
| Operating Supply Current | 72μA |
| Nominal Supply Current | 72μA |
| Quiescent Current | 18μA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~18V ±1.35V~9V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 200kHz |
| Unity Gain BW-Nom | 230 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.0026μA |
| Power Supply Rejection Ratio (PSRR) | 115dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Settling Time | 15 μs |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 3.5pF |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8659ARZ-RL Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. An op amp of this type is a General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. The total number of pins on linear amplifier is 14. It would be helpful if you could remember that this op amp ic should be powered by an 10V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 14 pins. With regard to input offset voltage, instrumentation amplifier is rated at 350μV. For this electronic part, it is recommended that you mount it with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 72μA . Voltage gain should remain at 120dB. Op amp ic has 4 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. The quiescent current is 18μA.
AD8659ARZ-RL Features
14 Pins
supply voltage of 10V
120dB voltage gain
Output Type: Rail-to-Rail
AD8659ARZ-RL Applications
There are a lot of Analog Devices Inc. AD8659ARZ-RL Instrumentational OP Amps applications.
- Gaming industry
- Communication device
- Thermocouples
- Subtraction operation circuits
- Integrator circuits
- Information processing
- Radar
- Displayers for aircraft and air transportation control systems
- RF cable systems
- Fission chambers
