AD8662ARMZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8662 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/16V |
| Number of Channels | 2 |
| Operating Supply Current | 3.1mA |
| Quiescent Current | 1.55mA |
| Slew Rate | 3.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 100 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 5V~16V |
| Output Current per Channel | 140mA |
| Input Offset Voltage (Vos) | 160μV |
| Gain Bandwidth Product | 4MHz |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 106.85dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 50μV |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.0003μA |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 12nV/sqrt Hz |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8662ARMZ-REEL Overview
In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. We are approaching the 8h termination of the year. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. Op amp rates 160μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. As long as the supply current of the chip does not exceed 3.1mA, this op amp ic can operate. 106.85dB should be the voltage gain. There are 2 channels on the operational amplifiers. On the output type, there are Rail-to-Rail different types of op amps. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. DigiTrim? is the number that corresponds to the series of the buffer op amp. 1.55mA quiescent currents are flowing through buffer op amp.
AD8662ARMZ-REEL Features
8 Pins
supply voltage of 5V
106.85dB voltage gain
Output Type: Rail-to-Rail
AD8662ARMZ-REEL Applications
There are a lot of Analog Devices Inc. AD8662ARMZ-REEL Instrumentational OP Amps applications.
- Portable docking station
- Ultrasound transducers
- Video computer boards
- Signal amplification
- Commercial audio systems
- Switching amplifier
- High/low-pass filter circuit
- Multimedia playback equipment
- Integrator circuits
- Radiation thermometry transducers
