Parameters |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-WFDFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
DigiTrim® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
AD8663 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Number of Channels |
1 |
Operating Supply Current |
230μA |
Quiescent Current |
285μA |
Min Input Voltage |
5V |
Slew Rate |
0.3V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
109 dB |
Current - Input Bias |
0.3pA |
Max Input Voltage |
16V |
Voltage - Supply, Single/Dual (±) |
5V~16V ±2.5V~8V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
40μV |
Bandwidth |
540 kHz |
Unity Gain BW-Nom |
520 kHz |
Voltage Gain |
140dB |
Average Bias Current-Max (IIB) |
0.000045μA |
Power Supply Rejection Ratio (PSRR) |
95dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
9V |
Low-Bias |
YES |
Micropower |
YES |
Max Frequency |
10kHz |
Bias Current-Max (IIB) @25C |
0.000045μA |
Programmable Power |
NO |
Dual Supply Voltage |
8V |
Input Voltage Noise Density |
23nV/sqrt Hz |
Height |
900μm |
Length |
3.25mm |
Width |
3.25mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8663ACPZ-R2 Overview
Packaging for the buffer amplifier is in the form of a 8-WFDFN Exposed Pad, CSP case. The instrumentation amplifier in this picture is of the General Purpose-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. It is estimated that there will be at least 8 terminations this year. The total number of pins on linear amplifier is 8. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. It has 8 pins that make up the linear amplifier. Op amp ic rates 40μV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. A supply current of 230μA can be used to operate this linear amplifier. 140dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The linear amplifier is packaged by using a TAPE AND REEL axis. DigiTrim? is the number that corresponds to the series of the buffer op amp. As a result, linear amplifier's quiescent current is 285μA.
AD8663ACPZ-R2 Features
8 Pins
supply voltage of 5V
140dB voltage gain
Output Type: Rail-to-Rail
AD8663ACPZ-R2 Applications
There are a lot of Analog Devices Inc. AD8663ACPZ-R2 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Industrial control system
- Signal transformation
- Signal operation
- Power control
- Image computer boards
- High gain DC amplifier
- Biopotential
- Switching amplifier
- Industrial applications including automation