AD8663ACPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad, CSP |
| Number of Pins | 8 |
| Supplier Device Package | 8-LFCSP-WD (3x3) |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | DigiTrim® |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | AD8663 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 5V |
| Operating Supply Current | 285μA |
| Quiescent Current | 285μA |
| Current - Supply | 230μA |
| Slew Rate | 0.3V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 109 dB |
| Current - Input Bias | 0.3pA |
| Voltage - Supply, Single/Dual (±) | 5V~16V ±2.5V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 540kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Voltage - Input Offset | 40μV |
| Current - Output / Channel | 50mA |
| Input Voltage Noise Density | 23nV/sqrt Hz |
| Number of Amplifiers | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8663ACPZ-REEL7 Overview
It is packaged in an 8-WFDFN Exposed Pad, CSP-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. An 8-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 285μA and 10 . The voltage gain should stay at 140dB. A instrumentation amplifier like this has 1 circuits. Op amp ic has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The temperature should not be lower than -40°C for operational amplifier ics to operate. It is recommended that op amp be used at temperatures below 125°C. There are a total of 1 elements in this linear amplifier. In order to ensure optimal performance, an 230μA supply is recommended for this electrical component. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 16V, and this is an excellent feature. Keeping the linear amplifier's supply voltage above 5V is recommended. The DigiTrim? stands for the buffer op amp's serial number. There is a quiescent current of 285μA in this operational amplifier circuit. As you can see, the linear amplifier has 1 amplifiers.
AD8663ACPZ-REEL7 Features
140dB voltage gain
Output Type: Rail-to-Rail
AD8663ACPZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8663ACPZ-REEL7 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Gaming industry
- pH (acidity)
- Band-pass filter
- Radiation thermometry transducers
- Television broadcasting equipment
- High gain DC amplifier
- Portable media players
- PDA
- Switching amplifier
