Parameters |
Input Offset Voltage (Vos) |
300μV |
Bandwidth |
540 kHz |
Unity Gain BW-Nom |
520 kHz |
Voltage Gain |
140dB |
Average Bias Current-Max (IIB) |
0.000105μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Voltage - Input Offset |
40μV |
Low-Bias |
YES |
Micropower |
YES |
Input Voltage Noise Density |
23nV/sqrt Hz |
Height |
850μm |
Length |
3mm |
Width |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Series |
DigiTrim® |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8667 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
15V |
Number of Channels |
2 |
Operating Supply Current |
570μA |
Quiescent Current |
285μA |
Supply Current-Max |
0.71mA |
Slew Rate |
0.3V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
100 dB |
Current - Input Bias |
0.3pA |
Voltage - Supply, Single/Dual (±) |
5V~16V ±2.5V~8V |
Output Current per Channel |
50mA |
AD8667ARMZ Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. There are two types of operational amplifiers in this circuit. Linear amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. As long as the supply current of the chip does not exceed 570μA, this op amp ic can operate. The voltage gain should stay at 140dB. Buffer op amp is equipped with 2 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 15V voltage. The DigiTrim? represents the op amp's series number. As a result, linear amplifier's quiescent current is 285μA.
AD8667ARMZ Features
8 Pins
supply voltage of 5V
140dB voltage gain
Output Type: Rail-to-Rail
AD8667ARMZ Applications
There are a lot of Analog Devices Inc. AD8667ARMZ Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Semiconductor detectors
- Fast A/D and D/A converters
- Instrumentation
- earphone
- Video data acquisition
- Addition operation circuits
- High input resistance broadband
- Automotive sensors
- High/low-pass filter circuit