AD8667ARZ-REEL7

2 Channels 50mA per Channel 0.3pA 100 dB Instrumentational OP Amps 0.000105μA 5V~16V ±2.5V~8V AD8667 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8667ARZ-REEL7
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 474
Description: 2 Channels 50mA per Channel 0.3pA 100 dB Instrumentational OP Amps 0.000105μA 5V~16V ±2.5V~8V AD8667 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Voltage - Supply, Single/Dual (±)	5V~16V ±2.5V~8V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	300μV
Gain Bandwidth Product	540kHz
Unity Gain BW-Nom	520 kHz
Voltage Gain	140dB
Average Bias Current-Max (IIB)	0.000105μA
Power Supply Rejection Ratio (PSRR)	105dB
Low-Offset	YES
Frequency Compensation	YES
Supply Voltage Limit-Max	9V
Voltage - Input Offset	40μV
Low-Bias	YES
Micropower	YES
Input Voltage Noise Density	23nV/sqrt Hz
Height Seated (Max)	1.75mm
Length	4.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	DigiTrim®
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8667
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Channels	2
Operating Supply Current	570μA
Quiescent Current	285μA
Supply Current-Max	0.65mA
Slew Rate	0.3V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	100 dB
Current - Input Bias	0.3pA

AD8667ARZ-REEL7 Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. This is a General Purpose type op amp. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 300μV. Surface Mount is the recommended mounting type for this linear amplifier. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Using a supply current of 570μA , this buffer op amp will be able to operate. 140dB should be the voltage gain. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The linear amplifier is packaged by using a TAPE AND REEL axis. The DigiTrim? represents the op amp's series number. There is a quiescent current of 285μA in this operational amplifier circuit.