Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
AD8668 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
15V |
Power Supplies |
+-2.5/+-8/5/16V |
Number of Channels |
4 |
Operating Supply Current |
6.2mA |
Quiescent Current |
1.55mA |
Supply Current-Max |
8mA |
Slew Rate |
3.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
110 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
5V~16V ±2.5V~8V |
Output Current per Channel |
140mA |
Input Offset Voltage (Vos) |
2.5mV |
Bandwidth |
4MHz |
Unity Gain BW-Nom |
4000 kHz |
Voltage Gain |
103.23dB |
Average Bias Current-Max (IIB) |
0.00055μA |
Power Supply Rejection Ratio (PSRR) |
115dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
600μV |
Low-Bias |
YES |
Micropower |
NO |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Input Voltage Noise Density |
10nV/sqrt Hz |
Height |
1mm |
Length |
5mm |
Width |
4.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8668ARUZ Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. General Purpose-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. A total of 14 terminations have been reported in the past few weeks. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 14-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 2.5mV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 6.2mA and 10 . 103.23dB should be the voltage gain. There are 4 channels on the operational amplifiers. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 15V. As a result of this, the buffer amplifier is packed in TAPE AND REEL. 1.55mA quiescent currents are flowing through buffer op amp.
AD8668ARUZ Features
14 Pins
supply voltage of 5V
103.23dB voltage gain
Output Type: Rail-to-Rail
AD8668ARUZ Applications
There are a lot of Analog Devices Inc. AD8668ARUZ Instrumentational OP Amps applications.
- Video computer boards
- Inverse/same-phase proportional circuit
- Large motor controllers
- Active probe
- Vehicle electronics
- Band-pass filter
- Industrial applications including automation
- Automotive sensors
- Band-stop filter
- Automation control systems