Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8668 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Power Supplies |
+-2.5/+-8/5/16V |
Number of Channels |
4 |
Operating Supply Current |
6.2mA |
Quiescent Current |
1.55mA |
Supply Current-Max |
8mA |
Slew Rate |
3.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
110 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
5V~16V ±2.5V~8V |
Output Current per Channel |
140mA |
Input Offset Voltage (Vos) |
2.5mV |
Gain Bandwidth Product |
4MHz |
Unity Gain BW-Nom |
4000 kHz |
Voltage Gain |
103.23dB |
Average Bias Current-Max (IIB) |
0.00055μA |
Power Supply Rejection Ratio (PSRR) |
115dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
600μV |
Low-Bias |
YES |
Micropower |
NO |
Programmable Power |
NO |
Wideband |
NO |
Input Voltage Noise Density |
10nV/sqrt Hz |
Height Seated (Max) |
1.2mm |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8668ARUZ-REEL Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 14 terminations over the past year. There are a total of 14 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 2.5mV. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThis op amp can operate from a supply current at 6.2mA. You should keep the voltage gain at 103.23dB for the time being. Instrumentation amplifier has 4 channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. As a result of this, the buffer amplifier is packed in TAPE AND REEL. There is an 1.55mA quiescent current running through op amp ic.
AD8668ARUZ-REEL Features
14 Pins
supply voltage of 5V
103.23dB voltage gain
Output Type: Rail-to-Rail
AD8668ARUZ-REEL Applications
There are a lot of Analog Devices Inc. AD8668ARUZ-REEL Instrumentational OP Amps applications.
- Addition operation circuits
- Proportional counter tubes
- Broadcasting
- Inverse/same-phase proportional circuit
- Communication
- Wireless base stations
- Displayers for aircraft and air transportation control systems
- Ultrasound transducers
- Radiation thermometry transducers
- Home audio systems