Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8668 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
15V |
Power Supplies |
+-2.5/+-8/5/16V |
Number of Channels |
4 |
Operating Supply Current |
6.2mA |
Quiescent Current |
1.55mA |
Supply Current-Max |
8mA |
Slew Rate |
3.5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
110 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
5V~16V ±2.5V~8V |
Output Current per Channel |
140mA |
Input Offset Voltage (Vos) |
2.5mV |
Bandwidth |
4MHz |
Unity Gain BW-Nom |
4000 kHz |
Voltage Gain |
103.23dB |
Average Bias Current-Max (IIB) |
0.00055μA |
Power Supply Rejection Ratio (PSRR) |
115dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
18V |
Voltage - Input Offset |
600μV |
Low-Bias |
YES |
Micropower |
NO |
Programmable Power |
NO |
Dual Supply Voltage |
5V |
Input Voltage Noise Density |
10nV/sqrt Hz |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8668ARZ Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Buffer amps of this type are called General Purpose-types. In the case of Tube cases, linear amplifier will be delivered. We are approaching the 14h termination of the year. The pins on this board total to 14 in total. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 2.5mV. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. This op amp can operate from a supply current at 6.2mA. The voltage gain should stay at 103.23dB. The op amp ic has 4 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The operating supply voltage of instrumentation amplifier is rated 15V voltage. Linear amplifier has a quiescent current of 1.55mA.
AD8668ARZ Features
14 Pins
supply voltage of 5V
103.23dB voltage gain
Output Type: Rail-to-Rail
AD8668ARZ Applications
There are a lot of Analog Devices Inc. AD8668ARZ Instrumentational OP Amps applications.
- ECG equipment
- Multimedia playback equipment
- Portable electronic products powered by batteries
- Vehicle electronics
- Professional videography
- Industrial applications including automation
- Blood pressure sensors
- Signal amplification
- Video data acquisition
- Communication