AD8671ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8671 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Operating Supply Current | 3.5mA |
| Quiescent Current | 3.5mA |
| Supply Current-Max | 4.2mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.04μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 20μV |
| Settling Time | 5.1 μs |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 6.25pF |
| Wideband | NO |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8671ARZ-REEL Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 75μV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Using an 3.5mA supply current, this operational amplifier ics can be operated. 135.56dB should be the voltage gain. Buffer op amp is equipped with 1 channels on the device. This linear amplifier pack is based on the TAPE AND REEL axis. There is a quiescent current of 3.5mA in this operational amplifier circuit.
AD8671ARZ-REEL Features
8 Pins
supply voltage of 5V
135.56dB voltage gain
AD8671ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8671ARZ-REEL Instrumentational OP Amps applications.
- Communication device
- Portable media players
- Commercial audio systems
- Switching amplifier
- Semiconductor detectors
- Medical imaging
- Weak signal detection
- Wireless base stations
- Professional videography
- High gain DC amplifier
