AD8672ARZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8672 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 7mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 135.56dB |
| Average Bias Current-Max (IIB) | 0.04μA |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 20μV |
| Settling Time | 5.1 μs |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Capacitance | 6.25pF |
| Wideband | NO |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8672ARZ-REEL Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. Op amp ic rates 75μV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . A supply current of 7mA can be used to operate this linear amplifier. Op amp is a member of the 135.56dB's 135.56dB family. There are 2 channels on the operational amplifiers. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. 3.5mA quiescent currents are flowing through buffer op amp.
AD8672ARZ-REEL Features
8 Pins
supply voltage of 5V
135.56dB voltage gain
AD8672ARZ-REEL Applications
There are a lot of Analog Devices Inc. AD8672ARZ-REEL Instrumentational OP Amps applications.
- MP3
- Subtraction operation circuits
- Digital cameras
- Inverse/same-phase proportional circuit
- Semiconductor detectors
- High speed sample
- Multiplication circuits
- Fission chambers
- Fast A/D and D/A converters
- Polarized electrodes
