AD8674ARZ
| Parameters | |
|---|---|
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8674 |
| Pin Count | 14 |
| Power Supplies | +-5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 14mA |
| Max Supply Current | 14mA |
| Quiescent Current | 3.5mA |
| Slew Rate | 4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 135.56dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 20μV |
| Gain | 135 dB |
| Settling Time | 5.1 μs |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.012μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Capacitance | 6.25pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
AD8674ARZ Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Tube case. We are approaching the 14h termination of the year. Buffer amplifier has a total of 14 pins on it. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are available on the instrumentation amplifier. Op amp rates 75μV as input offset voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . Using an 14mA supply current, this operational amplifier ics can be operated. 135.56dB should remain the voltage gain. The op amp ic has 4 channels on it. The quiescent current is 3.5mA.
AD8674ARZ Features
14 Pins
supply voltage of 5V
135.56dB voltage gain
AD8674ARZ Applications
There are a lot of Analog Devices Inc. AD8674ARZ Instrumentational OP Amps applications.
- Industrial control system
- Cinema or auditorium audio system
- Test equipment
- Test and measurement instruments
- Mobile phone
- Active probe
- Hand-held batteries
- Subtraction operation circuits
- Home audio systems
- Video data acquisition
