AD8676ARZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8676 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5.4mA |
| Quiescent Current | 2.7mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 4500μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8676ARZ-REEL7 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 50μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 5.4mA can be used to operate this linear amplifier. Voltage gain should remain at 126dB. The op amp ic has 2 channels on it. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. As a result, linear amplifier's quiescent current is 2.7mA.
AD8676ARZ-REEL7 Features
8 Pins
supply voltage of 15V
126dB voltage gain
Output Type: Rail-to-Rail
AD8676ARZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8676ARZ-REEL7 Instrumentational OP Amps applications.
- Fission chambers
- Test and measurement instruments
- Medical imaging
- Test equipment
- Scintillation detectors
- Measurements of Wheatstone bridge
- Television
- High-frequency data acquisition systems
- Integrator circuits
- Voltage regulation circuit
