AD8676BRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8676 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5.4mA |
| Quiescent Current | 2.7mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 4500μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 60μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height | 850μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8676BRMZ Description
Over the entire operating temperature range, the AD8676BRMZ precision operational amplifier provides ultralow offset, drift, and voltage noise, as well as very low input bias currents. The AD8676BRMZ is a high-precision, wide-bandwidth op-amp with low noise and rail-to-rail output swings. From 5 V to 15 V, the operation is thoroughly explained. The AD8676BRMZ has a rail-to-rail output similar to the OP184, but with a wider bandwidth and reduced voltage noise, as well as the precision and low power consumption of the industry-standard OP07. The AD8676BRMZ features a very low input bias current and low input current noise, compared to comparable low noise, rail-to-rail op-amps. The AD8676BRMZ is well suited for applications where substantial error sources cannot be tolerated, with a typical offset voltage of only 12V, offset drift of 0.2V/°C, and noise of only 0.10V p-p (0.1 Hz to 10 Hz). The very low noise, low input bias current, and wide bandwidth benefit precision instruments, PLL and other precision filter circuits, position and pressure sensors, medical instrumentation, and strain gage amplifiers.
AD8676BRMZ Features
Very high gain: 120 dB
Rail-to-rail output swing
±5 V to ±18 V operation
Wide bandwidth: 10 MHz typical
Very low offset voltage: 12 μV typical
Low input bias current: 2 nA maximum
Low input offset drift: 0.6 μV/°C maximum
Very low voltage noise 2.8 nV/√Hz @ 1 kHz
AD8676BRMZ Applications
PLL filters
Strain gage amplifiers
Medical instrumentation
Thermocouple amplifiers
Precision instrumentation
Laser diode control loops
