AD8676BRZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8676 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5.4mA |
| Quiescent Current | 2.7mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 50μV |
| Bandwidth | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 4500μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 12μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8676BRZ Description
Over the entire operating temperature range, the AD8676BRZ precision operational amplifier provides ultralow offset, drift, and voltage noise, as well as very low input bias currents. The AD8676BRZ is a high-precision, wide-bandwidth op amp with low noise and rail-to-rail output swings. From 5 V to 15 V, operation is thoroughly explained.
The AD8676BRZ datasheet claims that it has a rail-to-rail output similar to the OP184, but with a wider bandwidth and reduced voltage noise, as well as the precision and low power consumption of the industry-standard OP07 amplifier. The AD8676BRZ features a very low input bias current and low input current noise, compared to comparable low noise, rail-to-rail op amps.
The AD8676 is ideal for applications where substantial error sources cannot be tolerated, with a typical offset voltage of only 12V, offset drift of 0.2V/°C, and noise of only 0.10V p-p (0.1 Hz to 10 Hz). The very low noise, low input bias current, and wide bandwidth benefit precision instruments, PLL and other precision filter circuits, position and pressure sensors, medical instrumentation, and strain gage amplifiers.
To enhance SNR and dynamic range, many systems can benefit from the AD8676BRZ's low noise, dc accuracy, and rail-to-rail output swing.
The AD8676BRZ's smaller packaging and low power consumption enable maximum channel density or a tiny board size for space-critical devices.
The AD8676BRZ is designed to work in a wide range of temperatures (40°C to +125°C). The AD8676BRZ is offered in two lead-free packages: the 8-lead MSOP and the popular 8-lead narrow SOIC. Only tape and reel format MSOP packed devices are available.
AD8676BRZ Features
Very high gain: 120 dB
±5 V to ±18 V operation
Rail-to-rail output swing
Wide bandwidth: 10 MHz typical
Very low offset voltage: 12 μV typical
Low input bias current: 2 nA maximum
Low input offset drift: 0.6 μV/°C maximum
Very low voltage noise 2.8 nV/√Hz @ 1 kHz
AD8676BRZ Applications
PLL filters
Strain gage amplifiers
Precision instrumentation
Laser diode control loops
Medical instrumentation
Thermocouple amplifiers
Over the entire operating temperature range, the AD8676BRZ precision operational amplifier provides ultralow offset, drift, and voltage noise, as well as very low input bias currents. The AD8676BRZ is a high-precision, wide-bandwidth op amp with low noise and rail-to-rail output swings. From 5 V to 15 V, operation is thoroughly explained.
The AD8676BRZ datasheet claims that it has a rail-to-rail output similar to the OP184, but with a wider bandwidth and reduced voltage noise, as well as the precision and low power consumption of the industry-standard OP07 amplifier. The AD8676BRZ features a very low input bias current and low input current noise, compared to comparable low noise, rail-to-rail op amps.
The AD8676 is ideal for applications where substantial error sources cannot be tolerated, with a typical offset voltage of only 12V, offset drift of 0.2V/°C, and noise of only 0.10V p-p (0.1 Hz to 10 Hz). The very low noise, low input bias current, and wide bandwidth benefit precision instruments, PLL and other precision filter circuits, position and pressure sensors, medical instrumentation, and strain gage amplifiers.
To enhance SNR and dynamic range, many systems can benefit from the AD8676BRZ's low noise, dc accuracy, and rail-to-rail output swing.
The AD8676BRZ's smaller packaging and low power consumption enable maximum channel density or a tiny board size for space-critical devices.
The AD8676BRZ is designed to work in a wide range of temperatures (40°C to +125°C). The AD8676BRZ is offered in two lead-free packages: the 8-lead MSOP and the popular 8-lead narrow SOIC. Only tape and reel format MSOP packed devices are available.
AD8676BRZ Features
Very high gain: 120 dB
±5 V to ±18 V operation
Rail-to-rail output swing
Wide bandwidth: 10 MHz typical
Very low offset voltage: 12 μV typical
Low input bias current: 2 nA maximum
Low input offset drift: 0.6 μV/°C maximum
Very low voltage noise 2.8 nV/√Hz @ 1 kHz
AD8676BRZ Applications
PLL filters
Strain gage amplifiers
Precision instrumentation
Laser diode control loops
Medical instrumentation
Thermocouple amplifiers
