AD8676BRZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8676 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 5.4mA |
| Quiescent Current | 2.7mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 130 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126dB |
| Average Bias Current-Max (IIB) | 4500μA |
| Power Supply Rejection Ratio (PSRR) | 120dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 12μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 2.8nV/sqrt Hz |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8676BRZ-REEL Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Op amps are General Purpose types of amplifier on the chip. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 50μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . As long as the supply current of the chip does not exceed 5.4mA, this op amp ic can operate. Op amp is a member of the 126dB's 126dB family. As far as the device is concerned, buffer amplifier has 2 channels. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is used TAPE AND REEL to pack the op amps. As a result, linear amplifier's quiescent current is 2.7mA.
AD8676BRZ-REEL Features
8 Pins
supply voltage of 15V
126dB voltage gain
Output Type: Rail-to-Rail
AD8676BRZ-REEL Applications
There are a lot of Analog Devices Inc. AD8676BRZ-REEL Instrumentational OP Amps applications.
- Ultrasound transducers
- Signal operation
- Test equipment
- Inverse/same-phase proportional circuit
- Video conversion and routing
- Addition operation circuits
- Polarized electrodes
- Fission chambers
- Precision measurement
- Digital cameras
