AD8677AUJZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | iPolar® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8677 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Quiescent Current | 1.3mA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 200pA |
| Voltage - Supply, Single/Dual (±) | ±4V~18V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 130μV |
| Bandwidth | 600 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 600 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 45μV |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8677AUJZ-REEL7 Overview
Packaging for the buffer amplifier is in the form of a SOT-23-5 Thin, TSOT-23-5 case. There are two types of operational amplifiers in this circuit. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 5. A total of 5 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 5 pins. The input offset voltage is 130μV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . This op amp can operate from a supply current at 1.3mA. There should be no change in the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. As a result of this, the buffer amplifier is packed in TAPE AND REEL. This buffer amplifier is assigned within the iPolar? series by its manufacturer. There is a quiescent current of 1.3mA in this operational amplifier circuit.
AD8677AUJZ-REEL7 Features
5 Pins
supply voltage of 5V
140dB voltage gain
AD8677AUJZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8677AUJZ-REEL7 Instrumentational OP Amps applications.
- High input resistance broadband
- Television
- Industrial control system
- Navigation
- Biopotential
- Video conversion and routing
- High/low-pass filter circuit
- Automation control systems
- Medical instruments
- Test equipment
