AD8682ARMZ

2 Channels 12mA per Channel 6pA 90 dB Instrumentational OP Amps 9V~36V ±4.5V~18V AD8682 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8682ARMZ
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 628
Description: 2 Channels 12mA per Channel 6pA 90 dB Instrumentational OP Amps 9V~36V ±4.5V~18V AD8682 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8682
Pin Count	8
Number of Channels	2
Operating Supply Current	500μA
Quiescent Current	250μA
Slew Rate	9V/μs
Amplifier Type	J-FET
Common Mode Rejection Ratio	90 dB
Current - Input Bias	6pA
Voltage - Supply, Single/Dual (±)	9V~36V ±4.5V~18V
Output Current per Channel	12mA
Input Offset Voltage (Vos)	1mV
Bandwidth	3.5MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	3500 kHz
Voltage Gain	86.02dB
Power Supply Rejection Ratio (PSRR)	114dB
Voltage - Input Offset	350μV
Settling Time	1.6 μs
Dual Supply Voltage	9V
Input Voltage Noise Density	36nV/sqrt Hz
Height	850μm
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8682ARMZ Overview

There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. There are two types of operational amplifiers in this circuit. A Tube case is used to deliver the buffer op amp. The number of terminations approaches 8. A total of 8 pins are located on this board. It is important to remember that this op amp should be operated at a voltage of 15V volts. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. This electronic part is recommended for mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIn order for this instrumentation amplifier to operate, the supply current needs to be between 500μA and 10 . You should keep the voltage gain at 86.02dB for the time being. Buffer op amp is equipped with 2 channels on the device. Currently, linear amplifier is operating with a quiescent current of 250μA.