AD8684ARUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8684 |
| Pin Count | 14 |
| Number of Channels | 4 |
| Operating Supply Current | 1mA |
| Quiescent Current | 250μA |
| Slew Rate | 9V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 6pA |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 3.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3500 kHz |
| Voltage Gain | 86.02dB |
| Average Bias Current-Max (IIB) | 0.000125μA |
| Power Supply Rejection Ratio (PSRR) | 114dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 350μV |
| Settling Time | 1.6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 36nV/sqrt Hz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8684ARUZ Overview
In the package, you will find a 14-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. An op amp ic of the J-FET type. The op amp is delivered to you in a Tube case. During the past two weeks, there have been close to 14 terminations. Linear amplifier has a total of 14 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 14-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. Using a supply current of 1mA , this buffer op amp will be able to operate. Maintain 86.02dB as the voltage gain. There are 4 channels on the operational amplifiers. As a result, linear amplifier's quiescent current is 250μA.
AD8684ARUZ Features
14 Pins
supply voltage of 15V
86.02dB voltage gain
AD8684ARUZ Applications
There are a lot of Analog Devices Inc. AD8684ARUZ Instrumentational OP Amps applications.
- Large motor controllers
- Television broadcasting equipment
- Broadcasting
- Signal amplification
- Switching amplifier
- Automatic control
- Micro signal measurement
- High speed sample
- Signal filtering
- Digital cameras
