AD8691AKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8691 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.05mA |
| Quiescent Current | 1.05mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.00026μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8691AKSZ-REEL7 Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. An op amp of this type is a General Purpose-type. The op amp is delivered to you in a Tape & Reel (TR) case. The number of terminations approaches 5. In this case, there are 5 pins on the board. Please take in mind that op amp should be run at 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 5 pins are included on the operational amplifiers. Op amp ic rates 2mV for input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureThis op amp can operate from a supply current at 1.05mA. Keeping the voltage gain at 126.02dB is the best course of action. The op amp ic has 1 channels on it. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. As a result, linear amplifier's quiescent current is 1.05mA.
AD8691AKSZ-REEL7 Features
5 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail
AD8691AKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8691AKSZ-REEL7 Instrumentational OP Amps applications.
- Automotive sensors
- Blood pressure sensors
- Semiconductor detectors
- Micro signal measurement
- High speed sample
- Video data acquisition
- Oscilloscopes
- Displayers for aircraft and air transportation control systems
- Switching amplifier
- Information processing
