AD8691AUJZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8691 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.05mA |
| Quiescent Current | 1.05mA |
| Slew Rate | 5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 10MHz |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.00026μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 400μV |
| Settling Time | 1 μs |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8691AUJZ-REEL7 Overview
It is packaged in an SOT-23-5 Thin, TSOT-23-5-case that protects the operational amplifiers from damage. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. A total of 5 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. There are 5 pins on this chip. With regards to the offset voltage of the input, buffer amplifier is rated at 2mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . As long as the supply current of the chip does not exceed 1.05mA, this op amp ic can operate. It is recommended to keep the voltage gain at 126.02dB at all times. Op amp ic has 1 channels. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. Buffer amplifier has a quiescent current of 1.05mA.
AD8691AUJZ-REEL7 Features
5 Pins
supply voltage of 5V
126.02dB voltage gain
Output Type: Rail-to-Rail
AD8691AUJZ-REEL7 Applications
There are a lot of Analog Devices Inc. AD8691AUJZ-REEL7 Instrumentational OP Amps applications.
- Radar
- Medical imaging
- Differentiator circuits
- Large motor controllers
- Portable docking station
- Voltage regulation circuit
- Comparator
- Navigation
- Polarized electrodes
- Integrator circuits
