AD8692ARZ-REEL

2 Channels 80mA per Channel 0.2pA 90 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V AD8692 8 Pins 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-AD8692ARZ-REEL
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 547
Description: 2 Channels 80mA per Channel 0.2pA 90 dB Instrumentational OP Amps 2.7V~5.5V ±1.35V~2.75V AD8692 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Packing Method	TAPE AND REEL
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8692
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Power Supplies	3/5V
Number of Channels	2
Operating Supply Current	2.1mA
Quiescent Current	1.05mA
Slew Rate	5V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	General Purpose
Common Mode Rejection Ratio	90 dB
Current - Input Bias	0.2pA
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±1.35V~2.75V
Output Current per Channel	80mA
Input Offset Voltage (Vos)	2mV
Gain Bandwidth Product	10MHz
Unity Gain BW-Nom	10000 kHz
Voltage Gain	126.02dB
Power Supply Rejection Ratio (PSRR)	95dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	6V
Voltage - Input Offset	400μV
Low-Bias	YES
Micropower	NO
Bias Current-Max (IIB) @25C	0.000001μA
Programmable Power	NO
Wideband	NO
Input Voltage Noise Density	8nV/sqrt Hz
Height Seated (Max)	1.75mm
Length	4.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

AD8692ARZ-REEL Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. Please take in mind that op amp should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. It has 8 pins that make up the linear amplifier. There is an input offset voltage of 2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . An 2.1mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 126.02dB at all times. On the buffer amps, there are 2 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. TAPE AND REEL is adopted to pack the instrumentation amplifier. Buffer amplifier has a quiescent current of 1.05mA.