Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8694 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Operating Supply Current |
4.8mA |
Quiescent Current |
950μA |
Supply Current-Max |
5.2mA |
Slew Rate |
5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±1.35V~2.75V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
103.52dB |
Average Bias Current-Max (IIB) |
0.00026μA |
Power Supply Rejection Ratio (PSRR) |
95dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
400μV |
Settling Time |
1 μs |
Low-Bias |
YES |
Bias Current-Max (IIB) @25C |
0.000001μA |
Input Capacitance |
5pF |
Input Voltage Noise Density |
8nV/sqrt Hz |
Height |
1mm |
Length |
5mm |
Width |
4.4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
AD8694ARUZ Overview
Packaging for the buffer amplifier is in the form of a 14-TSSOP (0.173, 4.40mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tube case. There have been a total of 14 terminations over the past year. A total of 14 pins are located on this board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. There are 14 pins on this chip. There is an input offset voltage of 2mV for this buffer op amp. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 4.8mA can be used to operate this linear amplifier. You should keep the voltage gain at 103.52dB for the time being. 4 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. There is a quiescent current of 950μA in this operational amplifier circuit.
AD8694ARUZ Features
14 Pins
supply voltage of 5V
103.52dB voltage gain
Output Type: Rail-to-Rail
AD8694ARUZ Applications
There are a lot of Analog Devices Inc. AD8694ARUZ Instrumentational OP Amps applications.
- Digital cameras
- Broadcasting
- Weighing systems
- Automotive sensors
- Video conversion and routing
- Image computer boards
- Exponential operation circuits
- Semiconductor detectors
- Television broadcasting equipment
- Professional videography