Parameters |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
0.2pA |
Voltage - Supply, Single/Dual (±) |
2.7V~5.5V ±1.35V~2.75V |
Output Current per Channel |
80mA |
Input Offset Voltage (Vos) |
2mV |
Bandwidth |
10MHz |
Unity Gain BW-Nom |
10000 kHz |
Voltage Gain |
103.52dB |
Average Bias Current-Max (IIB) |
0.00026μA |
Power Supply Rejection Ratio (PSRR) |
95dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6V |
Voltage - Input Offset |
400μV |
Settling Time |
1 μs |
Low-Bias |
YES |
Bias Current-Max (IIB) @25C |
0.000001μA |
Input Capacitance |
5pF |
Input Voltage Noise Density |
8nV/sqrt Hz |
Height |
1.5mm |
Length |
8.75mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
14 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Subcategory |
Operational Amplifier |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
AD8694 |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Output Type |
Rail-to-Rail |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Operating Supply Current |
4.8mA |
Quiescent Current |
950μA |
Supply Current-Max |
5.2mA |
Slew Rate |
5V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
General Purpose |
AD8694ARZ Overview
There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. There is an input offset voltage of 2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . It is possible to operate this buffer amplifier from a supply current of 4.8mA . Maintain 103.52dB as the voltage gain. On the buffer amps, there are 4 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of instrumentation amplifier is rated 5V voltage. The quiescent current is 950μA.
AD8694ARZ Features
14 Pins
supply voltage of 5V
103.52dB voltage gain
Output Type: Rail-to-Rail
AD8694ARZ Applications
There are a lot of Analog Devices Inc. AD8694ARZ Instrumentational OP Amps applications.
- Navigation
- Power control
- Weak signal detection
- Instrumentation
- Signal filtering
- ECG equipment
- Industrial applications including automation
- Biopotential
- Subtraction operation circuits
- Commercial audio systems