AD8698ARZ
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifiers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8698 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 2.8mA |
| Nominal Supply Current | 3.2mA |
| Quiescent Current | 1.6mA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 132 dB |
| Current - Input Bias | 700pA |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±2.5V~15V |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 123.23dB |
| Average Bias Current-Max (IIB) | 0.0015μA |
| Power Supply Rejection Ratio (PSRR) | 114dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 15V |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0007μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 4.6pF |
| Neg Supply Voltage-Max (Vsup) | -15V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8698ARZ Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. This particular linear amplifier is a type of Operational Amplifiers device, to be precise. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 20μV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. An 2.8mA volt supply current is needed for this linear amplifier to operate. Maintain 123.23dB as the voltage gain. Instrumentation amplifier has 2 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. There is an 1.6mA quiescent current running through op amp ic.
AD8698ARZ Features
8 Pins
supply voltage of 2.5V
123.23dB voltage gain
Output Type: Rail-to-Rail
AD8698ARZ Applications
There are a lot of Analog Devices Inc. AD8698ARZ Instrumentational OP Amps applications.
- Comparator
- Strain gauges
- Cinema or auditorium audio system
- Communication
- Computer workstations
- Television broadcasting equipment
- Signal operation
- Broadcasting
- Professional videography
- Oscilloscopes
